If you’ve ever worked on your car before you might have a plastic cover underneath. This cover isn’t just for aerodynamics but actually protects the underside of the engine. If you try to do any work removing the plastic under the car can make it easier.
If you’ve wondered how to take off the plastic under a car there are usually bolts that you can unscrew to remove the piece. In some cases, there are push pins that can be removed by using a screwdriver. When it is removed you should have access to do oil changes and other maintenance.
Table of Contents
What does the plastic piece under the car do?
The plastic piece under your car is called a splash guard. This guard protects the underside of your engine from debris. These particles could otherwise damage lower engine parts. While having the plastic piece under your car makes it more difficult to work on it protects vital components
How to take off plastic under car
First, you will need to locate the plastic cover. There should be multiple fasteners to keep the guard from falling. After you locate the fasteners you can determine what tools you’ll need. You might need a ratchet and socket or a screwdriver.
Loosen all of the fasteners one by one until the plastic piece under the car falls. If there are any fasteners still holding the piece up locate where they are an they must be removed otherwise you might damage the piece.
Why is there a plastic piece under car dragging?
There is a plastic piece under your car to protect it. This shield protects your engine and other parts in your engine pay from rocks, dirt, and other debris. Without this, your engine is more open to the elements. Not having a plastic shield can affect the longevity of your car.
How to fix plastic under car
If your plastic piece has fallen off of your car there are several different ways to repair it. You can either replace the bolts or pins that have fallen out. This works well if your entire plastic piece is still intact. Although, sometimes when the plastic is hanging down the road wears it down.
You might only have a little of the plastic piece left on the car. You can either tear it off or get some zip ties and fasten it. Simply put the zip tie through one of the holes and attach it to an existing part on the car. That will keep the plastic from dragging
How to fix the plastic piece under the front of the car that is hanging down
You can use things like string or zip ties to fix the plastic piece hanging under your car. While this guard is used to protect your engine your car will run fine if it falls off. If you just want to pull it off you can. Just know that you will get more dirt in your engine area.
Why did my plastic cover under my car fall off
There can be multiple reasons why the plastic cover. Sometimes when you drive over obstacles on the road it can cause the plastic to fall down. Even corrosion can cause the blots to fall out. If that is the case the plastic guard can fall down.