BendPak Vehicle Alignment Lift — 9000-Lb. Capacity, Model# 5175820

$5,770.00

Category:

Description

The BendPak Vehicle Alignment Lift features adjustable multi-position leveling, integrated front radius plates and rear slip plates. These features make it compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems. Multi-caster slip plates in the back and radius plates upfront allow for extremely precise, free-floating alignment. Wheel service is where many shops make the big bucks, so these lifts need to be dependable and efficient to keep you satisfied. Free-floating alignments are made easy-to-handle to help you get to work without delay and generate faster turnaround. Multi-caster slip plates are positioned in the rear, with turnplates established in the front. This allows for the most precise alignments in the business. Aluminum-alloy construction turn plates are easily positioned using BendPak’s turnplate pockets. Larger and more robust than the previous BendPak slip-plate design, they’re also lighter in construction and feature dual “popsicle gap stops” for your convenience. Angled steel lock pins conveniently hold the plate in place when you want to use your machine strictly as a maintenance or storage lift. This lift also features oversized cable sheaves within the runway and cross tubes sheave axles. This is essentially the same cable-routing system found on BendPak full-size car lifts, which means these exceptionally over-engineered alignment lifts are prepared to service your shop with hardly any maintenance for years to come. Item too large for lift gate. Requires forklift on site for unloading. This item is delivered by flatbed truck Monday–Friday with 24 hours advance notice. A forklift is required to offload the lift from a dock-height flatbed trailer.

What’s Included
  • (1) Vehicle alignment lift

Features + Benefits

  • 9000-lb. maximum lifting capacity
  • CE Approved and Certified
  • Meets or exceeds standards prescribed by European Standard EN-1493
  • Multi-caster slip plates
  • Dual radius plate positions
  • Heavy-duty stainless steel lifting cables
  • Dual-hub cable sheaves
  • Grease nipples on every sheave and sheave axle
  • Single hydraulic cylinder
  • Integrated hydraulic flow restrictor
  • Durable powder-coat finish
  • Spring-loaded safety locks
  • Simple push-button lock release
  • Aircraft-quality stainless steel and aluminum pneumatic cylinders
  • Secondary lock system
  • Fully enclosed cables, airlines, safety latches and sheaves
  • Multiple adjustable height locking positions
  • Maintenance-free power system
  • Easy-to-reach operator controls
  • Non-skid runways
  • Item too large for lift gate; Requires forklift on site for unloading
Key Specs
Item# 95333
Brand BendPak
Manufacturer’s Warranty 12 months parts / 12 months labor
Ship Weight 3586.0 lbs
Lift Capacity (lbs.) 9,000
Max. Rise (in.) 70
Runway Dimensions L x W x H (in.) 76 1/2 x 70 x 6 1/2
Runway Dimensions L x W (in.) 76 1/2 x 70
Overall Height 88
Overall Width (in.) 127
Overall Length (in.) 224
Horsepower 60 Hz
Motor Phase 1
Volts 220
Lock Spacing (in.) 4
Locking Positions (qty.) 12
Time of Full Rise (seconds) 70
Product Weight 2,292

Reviews

There are no reviews yet.

Be the first to review “BendPak Vehicle Alignment Lift — 9000-Lb. Capacity, Model# 5175820”

Your email address will not be published.