BendPak Aligner Combo Kit — 14,000-Lb. Capacity, Open-Front Extended Alignment Lift with Turnplates and Slip Plates, Model# 5175893

$29,685.00

Category:

Description

The BendPak Aligner Combo Kit features an “open” design that makes it easy to access front turn plates and undercarriage. Front turn plates and rear slip plates are built right into the runways. Wheels respond to adjustments with no resistance. The Target 3DPro™ is one of the fastest and most accurate wheel alignment systems in the industry, thanks to advanced imaging technology that delivers fast, accurate alignments. A graphic display is used along with high-definition cameras to provide visual and directional assistance. The included 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift and comes complete with 3 safety lock positions and stackable pad adapters to provide added clearance when needed. Item too large for lift gate. Requires forklift on site for unloading. This item is delivered by flatbed truck Monday–Friday with 24 hours advance notice. A forklift is required to offload the lift from a dock-height flatbed trailer.

What’s Included
  • (1) Open-front extended alignment lift with turnplates and slip plates

Features + Benefits

  • 14,000-lb. lifting capacity
  • CE Approved and Certified
  • Meets or exceeds the standards prescribed by European Standard EN-1493
  • Heavy-duty turn plates and integrated rear slip-plates
  • Multi-position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail-kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal “Anti-Sway” UHMW slider blocks in each column
  • Oversize sheaves and heavy-duty 1/2in. aircraft cable
  • Rugged 1 3/8in. roller axles and oversize self-lubricating cable sheaves
  • Multi-position safety locks in each column with pushbutton safety release
  • Runways adjust for different tread widths and feature non-skid surface
  • Front and rear toe (“super toe”— toe out on turns)
  • Front caster (-28º to +28º)
  • Individual caster, camber and toe
  • Front and rear setback, SAI and thrust angle, included angle
  • Elevated 3-point or rolling run-out compensation
  • Elevated adjustments
  • Individual zoom readings allow clear screen visibility and software function from any wheel position
  • Customer database with customer notes and comments
  • Before and after adjustment readings
  • Visual vehicle adjustment help
  • ProSpec® software is available in multiple languages (Check for current language availability)
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Item too large for lift gate; Requires forklift on site for unloading
Key Specs
Item# 95332
Brand BendPak
Manufacturer’s Warranty 12 months parts / 12 months labor
Ship Weight 4505.0 lbs
Lift Capacity (lbs.) 14,000
Max. Rise (in.) 70
Runway Dimensions L x W (in.) 199 x 45
Overall Height 105
Overall Width (in.) 143
Overall Length (in.) 243
Horsepower 60 Hz
Motor Phase 1
Volts 220
Lock Spacing (in.) 4
Locking Positions (qty.) 13
Time of Full Rise (seconds) 60
Product Weight 3,586

Reviews

There are no reviews yet.

Be the first to review “BendPak Aligner Combo Kit — 14,000-Lb. Capacity, Open-Front Extended Alignment Lift with Turnplates and Slip Plates, Model# 5175893”

Your email address will not be published.